Sep 10, 2007
Océ Streamlined Workflow Optimizes Large Format Display Graphics Printing from Prepress through Finishing
System Reduces Labor and Material Costs, Increases Throughput and Creates Opportunities for New Business
September 10, 2007, Chicago, Illinois – Océ, a global leader in digital document management and delivery solutions, today announced it has added a complete digital system that streamlines the workflow – from prepress to finishing – of rigid and flexible display graphics media. The Océ Streamlined Workflow consists of a Zünd digital cutting table with appropriate tools, software for preparing and interpreting the cutting data, and pre- and post-installation application training and support. The Océ Streamlined Workflow is on display in the Océ Wide Format Printing Division booth #4463 at Graph Expo in Chicago, September 9-12, 2007.
Finishing is often the bottleneck in a display graphics digital printing workflow. The overwhelming majority of digital graphics prints require trimming or contour cutting once printing is complete. The Océ Streamlined Workflow can be used to optimize basic trimming tasks for rigid substrates such as hard and soft foamboard, plastic material, acrylic and styrene, and flexible media including paper, film, vinyl and fabric. It can also be used to finish more complex jobs such as contour-cut point-of-purchase displays, production-quantity decals, and structural projects.
The New Challenges for Digital Print Providers
Large format digital printing systems for graphics applications have increased in speed, quality and versatility. Many have the added ability to print on both rigid and flexible materials. Since nearly all prints require finishing, new challenges have emerged in digital graphics print production that need to be addressed:
Low productivity and high labor costs at the finishing stage. Manual cutting takes time and inevitably generates errors resulting in costly reprints, material waste and missed deadlines. Trimming thick media and manually cutting contour prints are particularly vulnerable to this low productivity / high labor cost risk.
Underutilization of expensive printing systems. Using all the square footage available on a flatbed or roll-based printer is the optimal way to realize the best return on investment. Using less than this or leaving ‘gaps’ in the printing underutilizes these capital-intensive systems.
Inventory costs and logistics complexity for pre-cut media. Pre-cut media is a time-saver on the finishing end, but it is more expensive than standard 4-foot by 8-foot media. Storage and inventory control of pre-cut media also create an additional level of logistics that needs to be managed. Reducing the need for pre-cut media by purchasing large boards and trimming them in-house saves money and storage space.
The Océ Streamlined Workflow
With the Océ Streamlined Workflow, customers can confidently guarantee to their clients outstanding, consistent quality with reduced turnaround times. The Océ Streamlined Workflow includes:
- A range of high quality Zünd digital flatbed cutters. Customers can select from a variety of medium, large or extra large sizes up to 128 inches wide and 118 inches long. The cutters are manufactured in Switzerland by Zünd Systemtechnik, the worldwide leader in multipurpose digital cutting solutions.
- A modular set of toolheads and tools. The modularity of the tool package provides a customized solution for specific cutting or trimming needs. The standard tool set includes a drag knife, an oscillating knife, a router and a kiss-cutting tool. Available as an option are specialty tools including a rotary knife for cutting textiles, and a creasing and a V-cutting tool for folding standard thin media as well as thick materials such as Reboard or triple-wall corrugated carton.
- Touch&Cut Vision Registration Front-End Software (VRFS). In order to automate cutting, Océ bundles the cutting table with a Zünd camera and Touch&Cut VRFS. This software compares the position of the cutting marks on the print and the cutting marks in the cut file, compensates for image or material distortion such as shrinking or stretching, and drives the cutter along the cut line with 100% accuracy. Touch&Cut software features a simple touch screen user interface and an exclusive materials profile library to store all cutting parameters.
- Prepare-it software. Designed with a user-friendly, step-by step-philosophy, Prepare-it software quickly and efficiently helps to prepare jobs for automated cutting. Within seconds, users can assign cutting tools to a curve and generate cutting marks and barcodes, saving hours in the prepress stage. Prepare-it is a true workflow tool that can help optimize printer productivity by maximizing media usage. With Prepare-it, users can efficiently manage the data workflow, nest jobs together on true shape and more systematically use 4-foot by 8-foot boards. The result is increased throughput, reduced media and labor costs, and the elimination of pre-cut media costs and related inventory management requirements.
- Pre- and post-sale technical support. For service and support, Océ has teamed with Zünd America. Zünd installs and provides service for the digital cutting table. Océ offers full training with ongoing applications and software support, and provides consumables. Océ takes the mystery out of digital cutting and helps print providers get started quickly.
Four Simple Steps from Artwork to Finished Job
Step One: Prepress. The artwork – in PDF or EPS format – is entered into the digital workflow. For contour cut applications, the artwork must include the outline path (vector data).
Step Two: Cutting data preparation and nesting. The artwork is sent to the Prepare-it job queue. Prepare-it is used to assign tools for each curve (kiss-cutting, routing, etc.) and to prepare cutting data. The software automatically generates a print file – complete with cutting marks and barcode – and a separate cut file.
Step Three: Process and print. The print file is processed through a raster image processing (RIP) software package such as ONYX® ProductionHouseTM V7, then sent to a printer such as the Océ Arizona® 250 GT UV flatbed printer. The completed print is ready for cutting.
Step Four: Automated Cutting. The completed print is placed on the Zünd digital cutting table. The operator simply scans the barcode on the print, and the Touch&Cut software automatically retrieves the correct cut file from the network. The software is linked to a camera mounted on the cutter. By reading the printed cutting marks on the print, Touch&Cut software positions and aligns the cutting data, and compensates for distortion so the cutting matches the print with 100% accuracy. Cutting begins automatically.
The finished, cut pieces are ready for delivery with minimal operator intervention, 100% accuracy and reduced turnaround time.
Reduce Costs, Improve Quality, and Add New Business
The Océ Streamlined Workflow significantly reduces labor costs compared to manual cutting because only one operator is required to run the highly productive cutter. Material costs are reduced by eliminating job re-runs due to human error. In addition, the advanced nesting capability enables the use of less-costly, large standard boards that can be cut in-house rather than outsourcing expensive pre-cut materials.
Customers can confidently offer their clients consistent, high-quality finished graphics and reduced turnaround times. Cutting is always 100% accurate, and the system compensates for any material distortion that may occur during printing.
Customers can expand their businesses by accepting premium-priced contour-cut jobs and production kiss-cutting jobs for creating mass-produced decals. With the routing capability, customers can also finish jobs on materials they wouldn’t consider cutting by hand such as DIBOND® or acrylic. Structural projects, such as self-standing displays or packaging prototypes, are other possible applications for opening up new markets.
Availability
The Océ Streamlined Workflow is available for order in the U.S. now. It is compatible with all wide format digital printing systems. For more information, contact your local Océ office, or visit www.oceusa.com.
Océ Display Graphics Systems
Océ Display Graphics Systems is a leading provider of professional, large format solutions for indoor and outdoor color display graphics applications. Océ solutions are specifically designed to enhance the revenue and profit opportunities for service providers by combining hardware with workflow software and the expertise to help companies expand into digital large format color. From extremely high-quality photo laser printers to outdoor-durable systems, Océ offers a total solution including hardware, software, services and financing. Customers benefit in working with a full-service partner they can count on to help their businesses grow.
About Océ
Océ N.V. is a leading international provider of digital document management technology and services. The company’s solutions are based on Océ’s advanced software applications that deliver documents and data over internal networks and the Internet to printing devices and archives – locally and around the world. Supporting the workflow solutions are Océ digital printers and scanners, considered the most reliable and productive in the world. Océ also offers a wide range of display graphics, consulting and outsourcing solutions.
Océ employs around 24,000 people, with 2006 annual revenues of $4 billion, operates in approximately one hundred countries and maintains research and manufacturing centers in the Netherlands, the United States, Canada, Germany, France, Belgium, the Czech Republic, and Romania. Océ North America is headquartered in Trumbull, CT, with additional business units in Chicago, IL; New York City; Boca Raton, FL; Salt Lake City, UT; Coventry, RI; and Vancouver, BC. For more information about Océ, visit www.oceusa.com. Outside the U.S., consult www.oce.com.
"Océ" and the Océ logo are registered trademarks of Océ-Technologies B.V. "Océ Arizona" is a registered trademark of Océ Display Graphics Systems, Inc. "ONYX" is a registered trademark and "ONYX ProductionHouse" is a trademark of ONYX Graphics, Inc. or are utilized under license from the trademark registered owner. "DIBOND" is a registered trademark of Alusuisse Composites, Inc. All product and company names are trademarks or registered trademarks and are the property of their owners and are respectfully acknowledged.
Note to editors: Consult the Océ Streamlined Workflow two-page overview sheet for a graphic detailing these four steps. If you would like to use the graphic in your publication, email kelli.ramirez@oce.com requesting a high-res JPEG of the Streamlined Workflow graphic.